Quick answer

Every 2025 4Runner i-FORCE MAX grade has a 2400-watt AC supply: with READY on, press AC 120 V and use the rear-console or cargo outlet only after its switch indicator illuminates.

Before you start

Check that your vehicle has it.

Availability

Toyota states that the 2400 W AC power supply is standard on every 2025 i-FORCE MAX 4Runner grade. It is a hybrid-only feature in this guide.

Retail trim / version
TRD Off-Road i-FORCE MAX, TRD Off-Road Premium i-FORCE MAX, Limited i-FORCE MAX, Platinum, TRD Pro, Trailhunter, All 2025 i-FORCE MAX hybrid grades
Required equipment / service
2400 W, 120 VAC inverter with rear-console and cargo-area outlets
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • 2400 W, 120 VAC inverter with rear-console and cargo-area outlets
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Toyota states that the 2400 W AC power supply is standard on every 2025 i-FORCE MAX 4Runner grade. It is a hybrid-only feature in this guide.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Toyota 4Runner
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park on solid level ground in a well-ventilated area, close the hood, engage the parking brake and select P.

  2. 02

    Depress the brake pedal, press the power switch and confirm the READY indicator is illuminated.

  3. 03

    Press the AC 120 V switch and verify that its indicator illuminates.

  4. 04

    With the appliance switched off, open an outlet lid and insert its plug fully; keep all connected loads at a combined 2400 W or less.

  5. 05

    When finished, switch appliances off, press AC 120 V to disable the outlets, unplug them and close the lids.

!

Important limits

  • The gasoline engine can start automatically to support the hybrid battery; never operate the supply in an unventilated garage or where snow can block exhaust flow.
  • Do not use the outlets as a household generator, for medical devices, during lightning, refueling or vehicle washing.
  • A device's startup surge can trip protection even when its labeled continuous wattage is below 2400 W.
If it does not work

Quick checks.

  • ✓If the AC indicator will not stay on, disconnect every load, confirm the total is below 2400 W and retry.
  • ✓If fuel and hybrid charge are low, refuel and drive to restore charge before trying again.
  • ✓At extreme battery temperatures, move to shade and cool the cabin or drive to warm the system, wait, then press AC 120 V again.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Toyota 4Runner Hybrid Owner's Manual — Power outlet (2400 W)

Relevant section or page: Pages 484–491. We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.