Quick answer

On a 2025 TRD Off-Road Premium i-FORCE MAX with the kick sensor enabled, stand 11.8–19.7 inches behind the bumper and move one foot within about 3.9 inches of its lower-right area, then withdraw it within one second.

Before you start

Check that your vehicle has it.

Availability

Toyota lists a hands-free power liftgate on the 2025 TRD Off-Road Premium grade. This guide narrows that equipment to its available i-FORCE MAX hybrid configuration; verify the kick-sensor control in the vehicle.

Retail trim / version
TRD Off-Road Premium i-FORCE MAX
Required equipment / service
Enabled Hands Free Power Back Door, lower-right kick sensor and electronic key, Hands Free Power Back Door
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Enabled Hands Free Power Back Door, lower-right kick sensor and electronic key
  • Hands Free Power Back Door
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Toyota lists a hands-free power liftgate on the 2025 TRD Off-Road Premium grade. This guide narrows that equipment to its available i-FORCE MAX hybrid configuration; verify the kick-sensor control in the vehicle.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Cargo & utility orientation diagram for Toyota 4Runner
Cargo & utility orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Turn the power switch off, verify that the kick-sensor setting is enabled and carry the electronic key.

  2. 02

    Stand about 11.8–19.7 in. (30–50 cm) behind the rear bumper within the smart-key range.

  3. 03

    Move one foot to within about 3.9 in. (10 cm) of the lower-right bumper without touching it, then pull the foot back within one second.

  4. 04

    Wait for the detection buzzer and step clear while the liftgate opens or closes fully.

  5. 05

    To stop a moving liftgate, repeat the kick; another kick after it stops reverses the operation.

!

Important limits

  • Keep people and cargo clear and do not touch hot exhaust components while placing a foot near the bumper.
  • Disable the kick sensor around car washes, towing, bicycle carriers or other situations that may cause unintended activation.
  • A second electronic key inside the cabin or cargo area can delay operation.
If it does not work

Quick checks.

  • ✓If nothing happens, remove snow, ice or mud from the lower-right bumper and move the vehicle away from grass or other moving objects.
  • ✓Withdraw the foot promptly; the door will not start while a foot remains detected under the bumper.
  • ✓If two beeps sound, repeat one clean kick; persistent failure after impact or bumper damage needs Toyota inspection.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Toyota 4Runner Hybrid Owner's Manual — Hands Free Power Back Door

Relevant section or page: Pages 132–143. We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.