Quick answer

Open the tailgate and left bed outlet panel, enable the outlets from Controls > Outlets & Mods, then connect loads within the displayed and documented current limits.

Before you start

Check that your vehicle has it.

Availability

Verified for 2026 Cybertruck configurations equipped with bed outlets; Tesla notes that equipment varies by market, configuration and manufacture date.

Required equipment / service
Cybertruck equipped with cargo-bed AC outlets
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Cybertruck equipped with cargo-bed AC outlets
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2026 Cybertruck configurations equipped with bed outlets; Tesla notes that equipment varies by market, configuration and manufacture date.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Tesla Cybertruck
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park Cybertruck, open the tailgate and locate the outlet cover on the left side of the cargo bed.

  2. 02

    Pull the left side of the panel open; the cover must remain open for the outlets to supply power.

  3. 03

    On the touchscreen, open Controls > Outlets & Mods and enable outlet power.

  4. 04

    Connect the appliance to the appropriate 120-volt or 240-volt receptacle and monitor the displayed load.

  5. 05

    Disconnect loads and turn outlet power off before closing the panel.

!

Important limits

  • The two bed 120-volt outlets share a 20-amp maximum.
  • The 240-volt bed outlet has a 40-amp maximum, and all cabin/bed AC outlets also have a combined system limit.
  • Low Power Mode disables cabin and cargo-bed outlets.
If it does not work

Quick checks.

  • ✓Keep the outlet cover fully open if no power is delivered.
  • ✓Disable Low Power Mode or raise battery charge above its threshold when appropriate.
  • ✓Remove overloaded devices and reset outlet power after the system reports an overload.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

Tesla Cybertruck Owner's Manual — Cargo Bed Outlets

We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.