Quick answer

Confirm Powershare Support says Enabled under Additional Vehicle Information, connect only the compatible Tesla adapter equipment, then start and monitor outlet power.

Before you start

Check that your vehicle has it.

Availability

Verified for 2026 Cybertruck with Powershare enabled; the adapter is an accessory and may require a Gen 3 Mobile Connector.

Required equipment / service
Powershare enabled and compatible Tesla Outlet Adapter
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Powershare enabled and compatible Tesla Outlet Adapter
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2026 Cybertruck with Powershare enabled; the adapter is an accessory and may require a Gen 3 Mobile Connector.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Tesla Cybertruck
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Open Controls > Software > Additional Vehicle Information and confirm Powershare Support is Enabled.

  2. 02

    Inspect the Tesla Outlet Adapter, charge port and required Gen 3 Mobile Connector for moisture or damage.

  3. 03

    Connect the supported Tesla equipment exactly as shown in its product guide, then attach the compatible appliance.

  4. 04

    Enable power and verify the appliance operates without an overload alert.

  5. 05

    Switch the appliance off, stop power and disconnect the equipment in the documented order.

!

Important limits

  • Do not substitute a Gen 2 Mobile Connector when Tesla specifies Gen 3.
  • Do not use damaged or wet equipment.
  • Avoid appliances whose startup or continuous demand exceeds the accessory rating.
If it does not work

Quick checks.

  • ✓Check Additional Vehicle Information for Powershare Support: Enabled.
  • ✓Confirm the vehicle software and accessory combination meet Tesla's current requirements.
  • ✓Disconnect the load and inspect all connections after an overheat or overload alert.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

Tesla Cybertruck Owner's Manual — Powering Devices Using the Charge Port

We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.