Quick answer

The one-session override starts charging when the connector is attached and restores the normal timer after that charge completes.

Before you start

Check that your vehicle has it.

Availability

Verified for both 2025 U.S. CX-70 PHEV packages; the override can also be selected on the center display when vehicle power is switched OFF.

Retail trim / version
PHEV Premium, PHEV Premium Plus
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for both 2025 U.S. CX-70 PHEV packages; the override can also be selected on the center display when vehicle power is switched OFF.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Charging & battery orientation diagram for Mazda CX-70
Charging & battery orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Open Settings from the Mazda Connect home screen.

  2. 02

    Select EV Settings, then Charge When Connected.

  3. 03

    Change the setting to Enable.

  4. 04

    Switch vehicle power OFF and connect the AC charge connector.

  5. 05

    Confirm charging starts instead of waiting for the programmed timer; after completion, confirm the original schedule is restored.

!

Important limits

  • Charge When Connected cancels the schedule only for immediate charging; it does not delete saved schedules.
  • The configured AC or schedule charge limit can still stop the session before 100%.
  • Always follow the charge-equipment instructions and keep the connector and inlet dry and free of foreign material.
If it does not work

Quick checks.

  • ✓If the vehicle still waits, verify Charge When Connected is enabled before reconnecting the cable.
  • ✓If charging ends early, inspect the active charge-limit setting.
  • ✓If the indicator shows a fault, disconnect safely, wait a few minutes and reconnect as directed by the Mazda manual.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Mazda CX-70 PHEV Digital Owner's Manual — Charge When Connected

Relevant section or page: Charging — Charge When Connected. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.