Quick answer

Engage 4WD LOW, stay below 20 mph (32 km/h), release the parking brake, close the driver door and press the HDC switch; a solid indicator means it is enabled.

Before you start

Check that your vehicle has it.

Availability

Verified for 2025 Compass Trailhawk vehicles equipped with HDC; operation requires 4WD LOW.

Required equipment / service
Compass Trailhawk equipped with Hill Descent Control and 4WD LOW
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Compass Trailhawk equipped with Hill Descent Control and 4WD LOW
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2025 Compass Trailhawk vehicles equipped with HDC; operation requires 4WD LOW.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Off-road control orientation diagram for Jeep Compass
Off-road control orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    On suitable off-road terrain, stop and engage 4WD LOW before the descent.

  2. 02

    Release the electric parking brake, close the driver door and keep vehicle speed below 20 mph (32 km/h).

  3. 03

    Press the HDC switch in front of the gear selector.

  4. 04

    Confirm the HDC switch lamp and cluster icon remain solid, then enter a sufficiently steep descent slowly.

  5. 05

    Use the accelerator or brake to override the target when needed, and press the HDC switch again to disable it after the descent.

!

Important limits

  • HDC is a low-speed off-road aid, not cruise control and not a substitute for driver braking.
  • It may remain enabled but inactive on level ground, uphill or on an insufficient grade.
  • Opening the driver door, leaving 4WD LOW or exceeding the system speed limits disables the feature.
If it does not work

Quick checks.

  • ✓A flashing lamp followed by shutoff means one or more enable conditions were not met.
  • ✓Recheck 4WD LOW, speed, parking-brake release and driver-door closure.
  • ✓If brake temperature or a system fault message disables HDC, stop safely and allow the brakes to cool or obtain service.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Jeep Compass Owner's Manual — Hill Descent Control

Relevant section or page: Safety — Hill Descent Control (HDC), If Equipped. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.