Quick answer

Rotate the Selec-Terrain control to the surface-matched mode and verify the cluster; ROCK is Trailhawk-only and requires 4WD LOW.

Before you start

Check that your vehicle has it.

Availability

Verified for 2025 Compass 4x4 models with Selec-Terrain; ROCK is exclusive to Trailhawk and only available in 4WD LOW.

Retail trim / version
2025 Compass Trailhawk for ROCK mode
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for 2025 Compass 4x4 models with Selec-Terrain; ROCK is exclusive to Trailhawk and only available in 4WD LOW.

  • 2025 Compass 4x4 models with Selec-Terrain
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Drive modes orientation diagram for Jeep Compass
Drive modes orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Assess whether the surface is normal pavement, snow, loose sand/mud or low-speed rocky terrain.

  2. 02

    Rotate the Selec-Terrain switch to AUTO for normal mixed driving, SNOW for low-grip winter surfaces, or SAND/MUD for loose off-road traction.

  3. 03

    For ROCK on a Trailhawk, first stop and engage 4WD LOW using Neutral, then select ROCK.

  4. 04

    Confirm the selected mode in the instrument cluster before moving.

  5. 05

    Return to AUTO when the special surface ends.

!

Important limits

  • SNOW may launch in second gear to reduce wheel slip.
  • SAND/MUD permits a traction strategy unsuitable for routine dry pavement.
  • A drive mode cannot create traction beyond the tires and surface conditions.
If it does not work

Quick checks.

  • ✓If ROCK is unavailable, verify the vehicle is a Trailhawk and 4WD LOW is fully engaged.
  • ✓If a requested mode does not stay selected, check for a 4WD or stability-system message.
  • ✓Return to AUTO, stop safely and cycle the ignition only after leaving the obstacle if the selector does not respond.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Jeep Compass Owner's Manual — Selec-Terrain Mode Selection Guide

Relevant section or page: Starting And Operating, page 89 — Selec-Terrain. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.