Quick answer

Set EV Charge Transfer reserve, plug the device into the V2L adapter, insert the adapter into the charge port and press its top button to activate power.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2024 U.S.-market Electrified GV70 with the compatible Genesis V2L adapter.

Required equipment / service
Electrified GV70 equipped with the V2L dongle
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Electrified GV70 equipped with the V2L dongle
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2024 U.S.-market Electrified GV70 with the compatible Genesis V2L adapter.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Genesis GV70
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Open Home > EV > EV Charge Transfer and set a battery-discharge limit below current charge.

  2. 02

    Park, turn the vehicle off, unlock the doors and inspect the dry V2L equipment.

  3. 03

    Connect the AC device to the V2L adapter before inserting the adapter into the charge port.

  4. 04

    Press the top button on the adapter to activate power.

  5. 05

    When finished, press the button to stop power, unlock the doors, remove the adapter and close both inlet covers.

!

Important limits

  • Never connect wet, damaged or ungrounded equipment.
  • Do not exceed the system's output rating or use critical medical equipment that requires uninterrupted power.
  • The system cuts power at the selected reserve or after overload/overheat protection.
If it does not work

Quick checks.

  • ✓Lower the discharge limit below the current battery percentage.
  • ✓Remove high-demand devices after an overload message.
  • ✓Unlock the doors before attempting to remove the adapter.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

Genesis — Electrified GV70 Vehicle-to-Load Guide

We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.