Quick answer

With both keys inside and the GV60 on, open Setup > Vehicle > User Profile, choose Face Register/Remove > Register, then follow the camera prompts outside.

Before you start

Check that your vehicle has it.

Availability

Verified for equipped 2024 U.S.-market GV60 vehicles; a maximum of two faces can be stored, one per driver profile.

Required equipment / service
GV60 vehicles equipped with Face Connect
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • GV60 vehicles equipped with Face Connect
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for equipped 2024 U.S.-market GV60 vehicles; a maximum of two faces can be stored, one per driver profile.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Biometric access orientation diagram for Genesis GV60
Biometric access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Place both registered smart keys inside, turn the GV60 on and select Setup > Vehicle > User Profile > Driver 1 or Driver 2.

  2. 02

    Enter the profile password and select Face Register/Remove > Register.

  3. 03

    Follow the instruction to exit while keeping the driver's door open, then stand 0.9–2.6 feet from the camera and look straight into its lens.

  4. 04

    Move your face naturally as prompted and wait for the circular camera light to turn green before ending registration.

!

Important limits

  • Registration requires both smart keys and the profile password.
  • Remove masks and sunglasses, clean the camera lens and avoid strong direct sunlight during enrollment.
If it does not work

Quick checks.

  • ✓A red camera light means registration failed; clean the lens and retry indoors or out of direct sun.
  • ✓If the menu is absent, confirm the vehicle is equipped with Face Connect and the Start/Stop button is on.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2024 Genesis GV60 Owner's Manual — Face Connect: Registering Face

We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.