Quick answer

Bring both smart keys, turn the GV60 on, open Setup > User Profile > Driver 1 or Driver 2 > Fingerprint Identification and choose Set/Delete Fingerprint > Set.

Before you start

Check that your vehicle has it.

Availability

Verified for equipped 2024 U.S.-market GV60 vehicles; Driver 1 and Driver 2 can each register one fingerprint.

Required equipment / service
GV60 vehicles equipped with the Fingerprint Authentication System
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • GV60 vehicles equipped with the Fingerprint Authentication System
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for equipped 2024 U.S.-market GV60 vehicles; Driver 1 and Driver 2 can each register one fingerprint.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Biometric access orientation diagram for Genesis GV60
Biometric access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Bring both registered smart keys into the GV60 and turn the vehicle on.

  2. 02

    Select Setup > User Profile > Driver 1 or Driver 2 > Fingerprint Identification.

  3. 03

    Enter the profile password and choose Set/Delete Fingerprint > Set.

  4. 04

    Place the chosen finger on the sensor repeatedly and at the requested angles until the Saving fingerprint message completes.

!

Important limits

  • Both smart keys and the profile password are required for enrollment.
  • The system does not operate for a profile until a fingerprint has been registered successfully.
If it does not work

Quick checks.

  • ✓If scanning stalls, clean and dry both the sensor and finger, then present different parts of the fingertip as prompted.
  • ✓If the wrong profile is selected, cancel and reopen Fingerprint Identification under the intended driver before saving.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2024 Genesis GV60 Owner's Manual — Registering Fingerprint

We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.