Quick answer

An equipped 2025 Forester can memorize a reduced rear-gate opening height from the gate's close button and the Center Information Display.

Before you start

Check that your vehicle has it.

Availability

Verified in the 2025 Forester Getting Started Guide for gasoline Foresters equipped with the factory Power Rear Gate; Base and unequipped configurations are excluded.

Required equipment / service
Forester Premium, Sport, Wilderness, Limited and Touring gasoline configurations with a factory Power Rear Gate
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Forester Premium, Sport, Wilderness, Limited and Touring gasoline configurations with a factory Power Rear Gate
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified in the 2025 Forester Getting Started Guide for gasoline Foresters equipped with the factory Power Rear Gate; Base and unequipped configurations are excluded.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Cargo & utility orientation diagram for Subaru Forester
Cargo & utility orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Open the rear gate with a Power Rear Gate button.

  2. 02

    Press a Power Rear Gate button again at the desired height, then make only gentle position adjustments by hand.

  3. 03

    Press and hold the close button on the inside edge of the gate until a chirp sounds and the hazard lights flash.

  4. 04

    On the center display, open Home, Settings, the Car tab, Power Rear Gate, and confirm Power Rear Gate Memory is enabled.

  5. 05

    Close and reopen the gate with a powered button to verify that it stops at the saved height.

!

Important limits

  • Check overhead clearance and keep people and cargo clear while the gate moves.
  • To save a different height, first turn Power Rear Gate Memory off in the center display and repeat the procedure.
  • Equipment varies by trim and package; the menu cannot add a powered gate to an unequipped vehicle.
If it does not work

Quick checks.

  • ✓If the gate ignores the saved height, verify Power Rear Gate Memory is enabled under Settings > Car > Power Rear Gate.
  • ✓If no confirmation chirp occurs, hold the inside close button longer while the gate is stationary.
  • ✓If powered operation is unavailable, unlock the doors and check the vehicle for a rear-gate warning.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Subaru Forester Getting Started Guide

Relevant section or page: How To Appendix — Memory Height, pages 148–149. We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial official-source publication.