Quick answer

The 2025 Ascent Power Rear Gate can memorize a custom opening height and apply it to powered gate commands.

Before you start

Check that your vehicle has it.

Availability

Verified in the 2025 Ascent Getting Started Guide for vehicles equipped with the factory Power Rear Gate.

Retail trim / version
All 2025 Ascent trims
Required equipment / service
the factory Power Rear Gate
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • the factory Power Rear Gate
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified in the 2025 Ascent Getting Started Guide for vehicles equipped with the factory Power Rear Gate.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Cargo & utility orientation diagram for Subaru Ascent
Cargo & utility orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Open the rear gate with a Power Rear Gate button.

  2. 02

    Press a powered gate button again at the desired height and, if needed, make a gentle adjustment by hand.

  3. 03

    Press and hold the close button on the inside edge of the gate until the confirmation chirp and hazard-light flash.

  4. 04

    Open Home > Settings > Car > Power Rear Gate on the center display and confirm Power Rear Gate Memory is enabled.

  5. 05

    Close and reopen the gate to verify the stored stop height.

!

Important limits

  • Keep the opening path and overhead area clear throughout programming.
  • Turn Power Rear Gate Memory off before attempting to store a different height.
  • Manual forcing or abrupt movement can damage the powered gate mechanism.
If it does not work

Quick checks.

  • ✓If the gate opens fully, confirm Power Rear Gate Memory is enabled in the Car settings.
  • ✓If the setting will not save, stop the gate completely and hold the inside close button until the confirmation signals occur.
  • ✓If powered operation is unavailable, unlock the vehicle and check for rear-gate warnings.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Subaru Ascent Getting Started Guide

Relevant section or page: How To Appendix — Memory Height, pages 154–155. We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial official-source publication.