Quick answer

A 2025 CX-30 power liftgate can remember a custom full-open position and return to the original position after a seven-second reset hold.

Before you start

Check that your vehicle has it.

Availability

Mazda lists the power liftgate on 2025 U.S. CX-30 2.5 S Premium models and above; the digital manual requires a gate position more than halfway open.

Retail trim / version
2.5 S Premium, 2.5 Carbon Turbo, 2.5 Turbo Premium, 2.5 Turbo Premium Plus
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Mazda lists the power liftgate on 2025 U.S. CX-30 2.5 S Premium models and above; the digital manual requires a gate position more than halfway open.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Cargo & utility orientation diagram for Mazda CX-30
Cargo & utility orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Open the power liftgate and stop it at the desired position above the halfway-open point.

  2. 02

    Press and hold the liftgate-mounted power-close switch for at least three seconds.

  3. 03

    Release after two warning sounds confirm the stored position.

  4. 04

    Close and reopen the liftgate while watching clearance to verify the limit.

  5. 05

    To restore full opening, open the gate and keep holding the close switch for at least seven seconds until three warning sounds are heard.

!

Important limits

  • A position at or below halfway cannot be stored.
  • Keep people and objects clear and watch the liftgate throughout powered movement.
  • An incline, strong wind, snow load or a weak/disconnected 12-volt battery can prevent normal automatic operation.
If it does not work

Quick checks.

  • ✓If two sounds are not heard, raise the gate farther than halfway and repeat the three-second hold.
  • ✓If automatic operation was lost after battery disconnection, fully close the liftgate manually once.
  • ✓If a seven-second reset produces two beeps at three seconds, continue holding until the third-beep reset confirmation.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Mazda CX-30 Digital Owner's Manual — Power Liftgate Opening Position

Relevant section or page: Power Liftgate — Convenient Ways to Use the Power Liftgate. We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.