Quick answer

With the Grecale secured outdoors, press the Maserati Connect App Remote Start soft-key twice within five seconds; before 15 minutes expires, unlock with the fob and press START/STOP to take over.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2024 U.S.-market Grecale GT mild-hybrid configuration with an active Maserati Connect account and Remote Start service.

Required equipment / service
active Maserati Connect Remote Start service
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • active Maserati Connect Remote Start service
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2024 U.S.-market Grecale GT mild-hybrid configuration with an active Maserati Connect account and Remote Start service.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Key fob & access orientation diagram for Maserati Grecale
Key fob & access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park outdoors, secure the vehicle, close the doors, hood and liftgate, switch off the hazards and leave the transmission in Park.

  2. 02

    In the Maserati Connect App, press and release the Remote Start soft-key twice within five seconds.

  3. 03

    Confirm the doors lock, position lights flash and the engine starts for the 15-minute cycle.

  4. 04

    Before the cycle ends, press the key-fob unlock button and enter the vehicle.

  5. 05

    Press and release START/STOP before the 15-minute timer expires to take control and drive.

  6. 06

    To cancel without driving, press the app's Remote Start soft-key once after the two-second request-protection period.

!

Important limits

  • Never remote-start the engine in a garage or other enclosed space.
  • Power windows and the power sunroof are disabled during Remote Start.
  • Only two consecutive 15-minute remote cycles are allowed before the ignition must be cycled to ON.
If it does not work

Quick checks.

  • ✓Read the cluster abort message and check doors, hood, liftgate, hazards, fuel and battery condition.
  • ✓Engage the electric parking brake or enable Auto Park if a key-off condition is blocking a remote start.
  • ✓Start the vehicle normally if the cluster says Remote Start Disabled — Start Vehicle to Reset.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2024 Maserati Grecale GT Owner's Manual — Remote Start System

Relevant section or page: Starting and Driving, pages 156–157 — Remote Start System. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.