Quick answer

Approach Unlock and Walk Away Lock are disabled by default on the 2025 QX60; turn them on in Vehicle Settings, then confirm the hazard lights flash twice when you walk away with the Intelligent Key.

Before you start

Check that your vehicle has it.

Availability

Verified as standard on all 2025 U.S.-market INFINITI QX60 trims: PURE, LUXE, BLACK EDITION, SENSORY and AUTOGRAPH.

Retail trim / version
PURE, LUXE, BLACK EDITION, SENSORY, AUTOGRAPH
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified as standard on all 2025 U.S.-market INFINITI QX60 trims: PURE, LUXE, BLACK EDITION, SENSORY and AUTOGRAPH.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Key fob & access orientation diagram for Infiniti QX60
Key fob & access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Use the driver-display controls to open Settings, then open Vehicle Settings.

  2. 02

    Enable Approach Unlock and Walk Away Lock; both functions are off by default.

  3. 03

    Switch the engine off, exit with the Intelligent Key and fully close every door and the liftgate.

  4. 04

    Walk away and confirm the hazard lights flash twice when the vehicle locks.

  5. 05

    Approach again with the key and verify the vehicle unlocks before using the door handle.

!

Important limits

  • The functions are disabled from the factory and must be enabled separately in Vehicle Settings.
  • Detection depends on Intelligent Key position and radio conditions; do not assume the vehicle locked without checking the hazard-light confirmation.
  • Walk Away Lock will not complete normally if a door or the liftgate remains open, the engine is running or a key is detected inside.
If it does not work

Quick checks.

  • ✓If the QX60 does not lock, close all doors and the liftgate, switch the engine off and make sure no Intelligent Key remains inside.
  • ✓If approach unlocking does not occur, confirm the setting is enabled and try unlocking once with the key to restore normal operation.
  • ✓If detection is intermittent, move the key away from a phone or metal object and replace a weak key battery.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 INFINITI QX60 Owner's Manual — Approach Unlock and Walk Away Lock

Relevant section or page: Pages 115, 139 and 232. We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.