Quick answer

Press the Canyon's remote-start button twice; the engine runs for 15 minutes, and pressing it twice again adds one additional 15-minute period.

Before you start

Check that your vehicle has it.

Availability

The official 2025 Canyon quick guide marks Remote Vehicle Start as optional; verify the remote-start key-fob button is present.

Required equipment / service
Canyon Elevation, AT4, Denali, AT4X or AT4X AEV Edition equipped with factory Remote Vehicle Start
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Canyon Elevation, AT4, Denali, AT4X or AT4X AEV Edition equipped with factory Remote Vehicle Start
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

The official 2025 Canyon quick guide marks Remote Vehicle Start as optional; verify the remote-start key-fob button is present.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Key fob & access orientation diagram for GMC Canyon
Key fob & access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Park the truck outdoors, shift to Park, and close the hood, doors and tailgate.

  2. 02

    Press the remote-start button on the key fob twice and confirm the parking lamps respond.

  3. 03

    Press the same button twice again during the active session to add one additional 15-minute period.

  4. 04

    After entering, press the brake and ENGINE START/STOP before driving, or hold the remote-start button until the parking lamps turn off to cancel.

!

Important limits

  • Never run the gasoline engine by remote start in an enclosed garage.
  • The truck must still be started normally inside before it can be driven.
If it does not work

Quick checks.

  • ✓If the command is ignored, confirm the hood, doors and tailgate are closed and move within fob range.
  • ✓If the permitted extension was already used, complete a normal engine start before attempting a new remote cycle.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

Getting to Know Your 2025 GMC Canyon - Remote Vehicle Start

Relevant section or page: 4. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.