Quick answer

With the 2024 Acadia fob within 3 feet, the driver-handle button unlocks the driver door and a second press within five seconds unlocks all doors; holding the interior lock switch with a door open pauses passive locking until the interior lock is pressed or the vehicle is started.

Before you start

Check that your vehicle has it.

Availability

Verified in the official 2024 Acadia owner manual for Keyless Access-equipped vehicles. The procedure applies to the gasoline 2.5L turbo model line.

Required equipment / service
Keyless Access
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Keyless Access
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified in the official 2024 Acadia owner manual for Keyless Access-equipped vehicles. The procedure applies to the gasoline 2.5L turbo model line.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Keyless access orientation diagram for GMC Acadia
Keyless access orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Carry the fob within about 3 feet and press the driver-door handle button once for the driver door or again within five seconds for all passenger doors.

  2. 02

    To enable normal automatic locking, open Settings > Vehicle > Remote Lock, Unlock and Start and turn on Passive Locking.

  3. 03

    To pause passive locking temporarily, leave a door open and hold the interior Lock switch for at least four seconds until the confirmation chime.

  4. 04

    Close the doors and verify they stay unlocked; press the interior Lock switch or start the vehicle when you want normal passive locking restored.

!

Important limits

  • Electronic interference can prevent the vehicle from detecting a fob left inside, so do not leave the fob in an unattended vehicle.
  • The pause is temporary and ends when the interior Lock switch is pressed or the vehicle is turned on.
If it does not work

Quick checks.

  • ✓If the handle button is unresponsive, move the fob closer, check its battery and confirm Keyless Access was not disabled with the fob-button shortcut.
  • ✓If the doors lock after the pause attempt, repeat the hold with a door open until the confirmation chime is heard.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2024 GMC Acadia Owner's Manual — Keyless Access and Passive Locking

Relevant section or page: 8-10. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.