Quick answer

Set the V2L discharge floor, plug the device into the adapter, insert it into the charge port and press the adapter switch to begin power delivery.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2024 U.S. GV60 equipped with Genesis's exterior Vehicle-to-Load adapter.

Required equipment / service
GV60 equipped with the exterior V2L connector
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • GV60 equipped with the exterior V2L connector
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2024 U.S. GV60 equipped with Genesis's exterior Vehicle-to-Load adapter.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Genesis GV60
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Set a V2L battery-discharge limit below the current state of charge in the EV menu.

  2. 02

    Park, inspect the dry adapter and connect the compatible AC device to it.

  3. 03

    Open the charging door and insert the V2L connector fully into the charge port.

  4. 04

    Press the switch on the adapter and confirm normal power delivery.

  5. 05

    Switch power off, unlock the vehicle and remove the adapter before closing the charge door.

!

Important limits

  • Do not use wet, damaged, ungrounded or overloaded equipment.
  • V2L stops at the configured battery reserve or during an overheat/overload condition.
  • Power draw reduces driving range.
If it does not work

Quick checks.

  • ✓Lower the reserve below current battery charge.
  • ✓Disconnect loads whose combined demand exceeds the system limit.
  • ✓Allow an overheated connector to cool and inspect it before reuse.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Send a source-backed correction →
Primary evidence

Genesis GV60 — How to Use Vehicle-to-Load

We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.
Editorial standardAll updatesSuggest a correction