Quick answer

Press the center-console Trail Control button, drive to the desired low speed and press SET+ or SET− on the steering wheel to store and adjust it.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2024 U.S./Canada Ford Bronco equipped with Trail Control.

Required equipment / service
Trail Control equipped
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Source-named equipment or service
  • Trail Control equipped
Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2024 U.S./Canada Ford Bronco equipped with Trail Control.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Towing & power orientation diagram for Ford Bronco
Towing & power orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    Close the driver door, fasten the seatbelt, release the parking brake and switch regular cruise control off.

  2. 02

    Press the Trail Control button on the center console.

  3. 03

    Drive at the low off-road speed you want to maintain.

  4. 04

    Press SET+ or SET− on the steering wheel to set the speed; hold either button for larger adjustments.

  5. 05

    Press CAN to cancel the set speed, or press the center-console button again to switch the system off.

!

Important limits

  • Trail Control is an aid and does not replace driver attention, braking judgment or the parking brake.
  • Ford lists lower availability limits in 4L and reverse than in 2H or 4H; follow the cluster messages and manual limits.
If it does not work

Quick checks.

  • ✓If prompted to reduce speed, slow below the limit for the selected driveline mode.
  • ✓The system is unavailable with the parking brake, regular cruise control or Pro Trailer Backup Assist active.
  • ✓If a fault message appears, resume manual control and have the system diagnosed as directed by Ford.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2024 Ford Bronco Owner's Manual — Trail Control

Relevant section or page: Pages 229–230. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.