Train the desired HomeLink button from the handheld remote, press the opener motor's LEARN or TRAIN button, then return within 30 seconds and hold the HomeLink button for two seconds twice, or a third time if required.
Check that your vehicle has it.
Verified only for 2020 U.S.-market Fiat 124 Spider models equipped with HomeLink and a compatible rolling-code garage-door opener.
Does the documented scope match your car?
This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.
Published availability and qualifications
Verified only for 2020 U.S.-market Fiat 124 Spider models equipped with HomeLink and a compatible rolling-code garage-door opener.
- 2020 124 Spider gasoline models equipped with HomeLink
Know what kind of control to look for.
This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.
Step by step.
- 01
Park outside the garage with the door path clear, switch the ignition on and hold the handheld transmitter 1–3 inches from the chosen HomeLink button.
- 02
Press and hold the transmitter and chosen HomeLink buttons together until the HomeLink indicator changes from a slow to a rapid flash, then release both.
- 03
At the garage-door motor, press and release its LEARN or TRAIN button.
- 04
Within 30 seconds, return to the vehicle and press the programmed HomeLink button twice, holding it for two seconds each time; use a third two-second press if the opener requires it.
- 05
Test the button while watching the door, people and objects, and keep the path clear.
Important limits
- Program and test only with the garage-door path completely clear.
- Do not erase all HomeLink channels when merely adding or retraining one device.
- HomeLink operation is disabled while the vehicle security alarm is active.
Quick checks.
- ✓Repeat the initial training with a fresh handheld-transmitter battery and keep it 1–3 inches from HomeLink.
- ✓Press the opener's LEARN or TRAIN button again and complete the in-car presses inside the 30-second window.
- ✓Consult the opener instructions if it requires the third two-second HomeLink press or a different rolling-code confirmation.
What happened on your vehicle?
Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.
2020 FIAT 124 Spider Owner's Manual — HomeLink Rolling-Code Programming
Relevant section or page: Getting To Know Your Vehicle, pages 67–69 — HomeLink. We use the written official source to determine the steps and applicability shown above.
Reviewed with a visible trail.
Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.
- Published
- Last modified
- Source checked
Guide change history
- Initial verified publication.