The equipped liftgate starts opening after the fob remains within 3 feet for three seconds and four warning beeps; its height is stored by holding the button beside the pull handle until the lamps flash and a beep sounds.
Check that your vehicle has it.
Verified for 2025 Traverse vehicles equipped with the AutoSense Power Liftgate. A conventional power-liftgate vehicle will not gain AutoSense behavior from the settings alone.
- Required equipment / service
- AutoSense Power Liftgate
Does the documented scope match your car?
This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.
Published availability and qualifications
Verified for 2025 Traverse vehicles equipped with the AutoSense Power Liftgate. A conventional power-liftgate vehicle will not gain AutoSense behavior from the settings alone.
Know what kind of control to look for.
This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.
Step by step.
- 01
With the vehicle in Park and the feature enabled, carry the key fob to within approximately 3 feet of the rear and remain there for three seconds.
- 02
Listen for the four warning beeps and step clear as the liftgate begins to open; move the fob farther than 3 feet away before opening if you need to cancel.
- 03
To program a height, open the liftgate and move it manually to the desired position.
- 04
Press and hold the button next to the liftgate pull handle until the turn signals flash and a beep confirms the saved position.
Important limits
- Confirm overhead clearance before opening or programming the liftgate.
- Hands-free opening does not mean hands-free closing; use one of the provided liftgate controls to close it.
Quick checks.
- ✓If AutoSense does not trigger, confirm the vehicle is in Park, the feature is enabled and the fob is not muted or left near the rear for an extended period.
- ✓If the height is not retained, repeat the hold until both the turn-signal flash and confirmation beep occur.
What happened on your vehicle?
Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.
Getting to Know Your 2025 Chevrolet Traverse — AutoSense Power Liftgate
Relevant section or page: 9. We use the written official source to determine the steps and applicability shown above.
View 1 supporting reference
- Official supportChevrolet Support — AutoSense Liftgate ↗
Reviewed with a visible trail.
Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.
- Published
- Last modified
- Source checked
Guide change history
- Initial verified publication.