Quick answer

The 2022 Bolt EV remembers One-Pedal Driving until the driver switches it off, and its instrument-cluster indicator confirms the active state.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2022 U.S.-market Chevrolet Bolt EV. The documented console-button system operates in both Drive and Reverse.

Retail trim / version
2022 Bolt EV 1LT, 2022 Bolt EV 2LT
Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2022 U.S.-market Chevrolet Bolt EV. The documented console-button system operates in both Drive and Reverse.

Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Cabin & comfort orientation diagram for Chevrolet Bolt EV
Cabin & comfort orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    With the vehicle ready and in Drive, press the One-Pedal Driving button on the center-console shift control.

  2. 02

    Confirm that the One-Pedal Driving indicator appears in the instrument cluster.

  3. 03

    Press the accelerator normally to gain speed; lift only partway for gentler deceleration or fully for stronger deceleration toward a stop.

  4. 04

    Continue using the brake pedal whenever harder or emergency braking is required.

  5. 05

    Press the One-Pedal Driving button again to return to conventional two-pedal behavior; the vehicle will otherwise remember the enabled setting across power cycles.

!

Important limits

  • Available regenerative deceleration can change when the battery is near full charge or cold.
  • Turn One-Pedal Driving off on slippery roads and use the brake pedal as conditions require.
  • On slopes or after an extended stop, the electric parking brake may apply; pressing the accelerator releases it automatically when conditions permit.
If it does not work

Quick checks.

  • ✓If the indicator does not appear, press the dedicated button again and confirm the vehicle is in a drivable state.
  • ✓If deceleration is weaker than expected, check the regenerative-power display for a limited condition and use the brake pedal.
  • ✓If the car will not move after a stop, press the accelerator normally; the electric parking brake may have engaged.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2022 Chevrolet Bolt EV Owner's Manual — One-Pedal Driving

Relevant section or page: Pages 171–172. We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.