Quick answer

The 2024 BMW i4 can prepare its battery for faster DC charging automatically from BMW navigation or manually from the Charging menu.

Before you start

Check that your vehicle has it.

Availability

Verified by BMW for electric vehicles using BMW Operating System 8, 8.5 or 9; this guide is scoped to the 2024 U.S.-market i4.

Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified by BMW for electric vehicles using BMW Operating System 8, 8.5 or 9; this guide is scoped to the 2024 U.S.-market i4.

  • 2024 i4 models with BMW Operating System 8, 8.5 or 9
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Charging & battery orientation diagram for BMW i4
Charging & battery orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    For automatic preparation, set a compatible DC fast-charging station as the destination in BMW navigation.

  2. 02

    For manual control, open the Apps menu on the center display.

  3. 03

    Select Vehicle, then Charging.

  4. 04

    Select Pre-condition battery and choose the desired setting.

  5. 05

    Leave enough driving time before the charging stop and connect to the DC charger after arrival.

!

Important limits

  • The vehicle may decline manual preparation when range is too low, battery state of charge is too high, battery temperature is already suitable, MaxRange is active or charging is already in progress.
  • Entering a DC charging station as the navigation destination may already start the process, so a second manual activation is unnecessary.
  • Charging power still depends on the charger, battery state, temperature and site conditions.
If it does not work

Quick checks.

  • ✓If Pre-condition battery is unavailable, turn off MaxRange and check whether the car is already charging.
  • ✓Confirm that the selected navigation destination is identified as a DC fast charger.
  • ✓If the battery is already at a suitable temperature or charge level, no additional preparation may be shown.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

BMW USA FAQ — Battery Heat Management for Optimized DC Charging

Relevant section or page: Electromobility — High-voltage battery heat management. We use the written official source to determine the steps and applicability shown above.

View 1 supporting reference
Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.