Quick answer

Pull the parking-brake switch to secure the Integra; for traffic stops, enable Brake Hold, stop normally and release the pedal only after hold is confirmed.

Before you start

Check that your vehicle has it.

Availability

Verified for the 2025 Integra lineup with the electric parking brake and automatic Brake Hold system.

Compatibility check

Does the documented scope match your car?

This check combines the verified year, any source-supported powertrain scope, source-named trim/package and required equipment. It does not read a VIN or factory build record.

Can you see the required control, menu or equipment on your vehicle?
Published availability and qualifications

Verified for the 2025 Integra lineup with the electric parking brake and automatic Brake Hold system.

  • 2025 Integra models equipped with Electric Parking Brake and Automatic Brake Hold
Visual orientation

Know what kind of control to look for.

This original category diagram is an orientation aid, not a picture of your exact trim. Use the written labels and your vehicle manual to identify the real control.

Parking brake orientation diagram for Acura Integra
Parking brake orientationOriginal visual guide · controls vary by trim · not to scale
How to use it

Step by step.

  1. 01

    To park, stop completely and pull the electric parking-brake switch; confirm its indicator.

  2. 02

    For a temporary traffic stop, enable Brake Hold before stopping.

  3. 03

    Press the brake to stop and release it only after the hold indication confirms pressure is retained.

  4. 04

    To move, select the appropriate gear and press the accelerator; the parking brake or hold releases as conditions permit.

!

Important limits

  • Brake Hold is not a substitute for the parking brake when leaving the vehicle.
  • Remain ready to press the brake pedal.
  • Release behavior depends on normal prerequisite conditions such as the driver's seating and restraint state.
If it does not work

Quick checks.

  • ✓Confirm the parking-brake or Brake Hold indicator before releasing the pedal.
  • ✓Close the driver door and fasten the belt if Brake Hold will not become ready.
  • ✓Use the brake pedal and arrange service if a brake-system warning appears.
Owner feedback

What happened on your vehicle?

Your response is stored on this device. If you separately allow analytics, a non-account-linked guide/result event may also be measured. No VIN or personal information is requested.

Primary evidence

2025 Acura Integra Info Center — Electric Parking Brake with Brake Hold

Relevant section or page: Engine/Chassis — Electric Parking Brake. We use the written official source to determine the steps and applicability shown above.

Open official source ↗
Editorial record

Reviewed with a visible trail.

Scope and steps were checked by Car Cheat Codes Editorial Review. A guide is narrowed or corrected when the source does not support a broader claim.

Published
Last modified
Source checked
Guide change history
  • Initial verified publication.